Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Waters Corp Tubing, PTFE, .080 in OD x .058 in ID x 25 ft (2 mm OD x 1.5 mm ID x 7.6 m)
Tubing, PTFE, .080 in OD x .058 in ID x 25 ft (2 mm OD x 1.5 mm ID x 7.6 m)
Perkin Elmer US LLC Stainless Steel Tubing Kit - 125 cm x 0.0625 in O.D. x 0.02 in I.D.
Stainless Steel Tubing Kit - 125 cm x 0.0625 in O.D. x 0.02 in I.D.
Glass Expansion Peristaltic Pump Tubing, PVC, 2-tag, for large pump white/white, 1.02 mm with flared ends. Inexpensive all-around tubing for general applications. Pack of 6 (1360400227, 842312051521)
Contour Flared End PVC Pump Tube 2tag 1.02mm ID White/White (PKT 6).Tag Colors: White/WhiteID mm: 1.02Wall Thickness mm: 0.86OD mm: 2.74Overall Length: 455mm (152mm spacing between tags)Number of Tubes Per Pack: 6Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon R3603/R3607 or equivalent.Special Properties: Inexpensive all-around tubing for general laboratory applicationsChemical Compatibility: Excellent for aqueous solutions of the following acids and concentrations, up to 35% Nitric Acid, up to 37% Hydrochloric Acid, up to 25% Hydrofluoric Acid, up to 30% Hydrogen Peroxide.Limitations: Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
AVANTOR MASTERFLEX (VWR LLC) C-Flex Tubing Braided; 3/4""id, 1 1/8""OD, 3/16"" Wall, 15'
Applications: For use with cell cultures, vessel and tank transfer, pump applications and cold storage. Characteristics: C-Flex formula 082, clear, animal derived component free (ADCF) resin and reinforced with polyester braid. Certifications: Complies with USP Class VI standards. Temperature range: -50 to 275¿F (-45 to 135¿C) Sterilize: Autoclavable and gamma sterilizable.
Research Products International Corp Autoclavable Plastic Tubing, 2 ml Thick, 6 Inches Wide x 900 Feet Long
Create custom size bags for hybridization procedures or for autoclaving individual items. Ultra-clear 2 ml polypropylene tubing allows full visibility of bag contents. Tubing can be sealed quickly using an electric bag sealer.
Optional dispenser provides a convenient method for keeping tubing on a benchtop or can be wall mounted. Divider kit organizes various size rolls for convenient dispensing.
Accuflow Systems 3/4 Inch Silicone Hose
3/4 Inch ID Platinum Cured Wire Reinforced Silicone Hose 24 Inches OAL
Helix Medical Inc TUBING SIL .188 X .313 50FT
Platinum cured, non-implantable, non-adherent tubing for bio/pharma industry standards. Ability to operate at elevated temperatures. Will not oxidize/deteriorate. Can be sterilized with autoclave, ethylene oxide, or gamma.
Accuflow Systems 1/2 Inch PTFE Smooth Bore Hose
1/2 In. ID PTFE Smooth Bore Hose Stainless Braided with Silicone Cover 48 Inches OAL
Accuflow Systems 1 Inch Silicone Hose
1 Inch ID Platinum Cured Wire Reinforced Silicone Hose 96 Inches OAL
Electron Microscopy Sciences EMS Staining Plate for Electron Microscopy
The EMS Staining plate for Electron Microscopy was developed by Dr. Miguel Berrios, at SUNY at Stony Brook. The chemical etching process, antibody incubations and final staining with heavy metal salts of each grid is performed in the small cone-shaped wells on the EMS staining plate.
The base plate is a solid piece of chemical-resistant silicone with 96 cone-shaped wells organized in parallel rows of eight, using the lid of a 96-well Falcon 3072 Microtest III Plate as a cover. The base has two notches to serve for orientation and a lip where the cover rests. Each well is an inverted cone 7 mm in diameter and 2 mm deep. Grids either float or rest at the bottom of each well. The wells allow incubation of a grid in 12-60 microliters of solution without reagent loss due to adsorption or cross contamination, even when the plate is tilted up at 70 degree. Due to the shape of the well, the flat surface of the grids never come into contact with the walls of the well.